Spray Applied Force Protection

PAXCON [PX-3350], developed by LINE-X is an advanced spray applied polymer coating formulated to mitigate the effects of a bomb blast.

The Effects of Blast Mitigation

PAXCON is sprayed on the exterior and interior of the supporting walls and is touch dry in seconds. During a bomb blast PAXCON mitigates the effects of the explosion by providing a flexible liner that absorbs the force of the blast and holds the fragmented wall together.

PAXCON has been put through extreme testing by the Air Force Research Laboratory. Testing involved 9’x9’ panels, one uncoated and the other coated with PAXCON which were exposed to bomb blasts at a distance of 35ft. The PAXCON coated panel survived this test whilst the non coated panel disintegrated as a result of the blast.

Futher tests constructed by the Air Force research lab provided evidence that walls coated in the PAXCON material can reduce the stand off distance by over 50%.

The tests also indicated that PAXCON was the only coating that passed all bomb blast testing out of the 27 coatings that were tested.

After the 9/11 attacks in America LINE-X developed PAXCON to help protect current and future assets from attack.

The US Pentagon was one of the first major Government buildings to specify PAXCON “to protect the Pentagon against potential impacts and bomb blasts.”

Blast Resistant Coatings Protecting Military, Civilian and
Government Buildings

PAXCON coatings are currently protecting military, civilian and government building across the globe. Applications can include underground car parks, banks, large postal offices, airport baggage handling centres and new architectural projects.

PAXCON can also be specified  for new builds and applied during the construction of the site. Once the structural walls have been built, PAXCON applicators go on site to spray the polymer coating onto the prepared wall. With rapid touch drying time of only a few seconds PAXCON does not hold up the construction process of the site. Once the coating has been sprayed, the carpenters, builders and plasterers can carry on with their duties almost immediately.

LINE-X Protective Coatings Ltd also have a structural and masonry retro fit program where existing buildings/structures can have PAXCON applied to the substrate of the supporting walls, making them resistant to particular forms of bomb blast.

The retro fit program includes PAXCON being applied to lightweight structures such as plywood panelling and timber stud walls as well as heavyweight masonry structures made from brick or blockwork.

PAXCON polymer coatings will adhere to most well prepared substrates including wood, steel, fiberglass and dyneema.

PAXCON Provides Anti-Terror Protection

PAXCON Blast Mitigation is an integral part of security planning. When security fails to prevent acts of terrorism PAXCON is there to save and protect targeted assets from terrorist attempts. PAXCON should be integrated into your anti-terrorism package to protect your assets when other preventative measures have not succeeded.

Enhanced Polymer Coatings for Ballistic Protection

Blast Mitigation is one of many coating solutions provided by LINE-X Protective Coatings Ltd. LINE-X Spall Liner [PX-2100] is a spray applied coating that absorbs the impact from projectiles preventing both the projectile and the armoured plating from creating spall.

Spall is the name given to fractured elements from a projectile or armoured plating that occur when that projectile impacts at high speed with the armoured plating. These fractured elements when dispersing are the cause of a large volume of injuries to many of our soldiers.

The flexibility and absorption that LINE-X Spall Liner offers when applied to armoured panels eradicates the splintering effect by cushioning the impact and entrapping the fractured elements.

Impact Absorbtion Qualities

The LINE-X spall liner has been engineered from specially formulated polymers to allow a certain degree of flexibility and durability to be able to absorb the impact from high speed projectiles when coated onto armored panels.

These advanced polymers have allowed the LINE-X to produce a spray-on Spall Liner for armoured vehicles to be used in conjunction with Dyneema and similar armoured panels which is significantly lighter and more cost effective than armouring with steel plates.
Other Spall Liner applications include the coating of Breastplates and Gun Turrets. LINE-X Spall Liner is currently being used on both the strike side and reverse side of Dyneema, Ceramic and Armour Plated panels.

Advanced Armoured Vehicle Coatings

LINE-X applications are being specified and carried out on several military and ‘blue light’ fleets due to the many advantages LINE-X coatings have to offer.

The ballistic properties are obviously one of the key attractions of the LINE-X Spall Liner material, which is able to provide advanced, lightweight  armoured protection at a lower cost to the usual methods of up-armouring vehicles. This coating also offers plenty of hidden gems including rust and corrosion prevention, resistant to most chemicals; it is easily maintained, and offers a non-skid surface.

Military vehicles operate in harsh and rough terrains, which have a tendency for rocks, stones and debris to be thrown up causing damage to the vehicle. The superior durability of the LINE-X range of coatings have lead to many military fleets adopting LINE-X as their choice of protective coating, in order to prevent exactly this type of damage from occurring.

UK “Blue Light” fleets have started to adopt the LINE-X coating as a Van Liner for the added protection of preventing projectiles such as scaffold poles being forced through the standard metal side panels of the van as well as providing a non-skid surface that is easily jet washed back for cleanliness.

DefenCell - Rapidly deployed, lightweight, compact, non-metallic, earth filled protective barrier systems

DefenCell is a range of products that are designed and manufactured to provide protection for personnel, equipment and infrastructure against a wide selection of threats in the Security, Defence, Flood and Environmental sectors.

There are three main product groups in the DefenCell portfolio and a number of other complementary protection products available.

The products are:

• DefenCell Barriers, non metallic cellular (Ballistic, Blast, HVM, UXO and Flood Protection),
• DefenCell MAC, welded mesh gabions (Ballistic, Blast, HVM and Flood Protection).
• DefenCell Profile, non metallic cellular (Hostile Vehicle Mitigation (HVM) Barriers, Berms)

DefenCell - Barriers - non metallic cellular (Ballistic, Blast, HVM, UXO and Flood Protection)

The DefenCell Barrier is the result of a decade long investment in research, development and testing to create one of the most effective and versatile expeditionary protection systems available. A well-proven cellular construction combined with the strong geotextile material makes DefenCell a durable but lightweight and compact solution that is easily filled to provide protection to personnel and infrastructure from a variety of threats.

Designed by Engineers for Engineers, DefenCell is being used to provide protection to troops in harsh and often remote operational environments and is ideal for a wide range of Military and Security applications. Taking advantage of the small logistical burden of DefenCell's light weight and compact packaging, typical uses include protective walls, perimeter security, entry control points, ranges  and training operations.

DefenCell - Profile - non metallic cellular (Hostile Vehicle Mitigation (HVM) Barriers, Berms)

DefenCell Profile is our cellular Hostile Vehicle Mitigation barrier, developed with advice from the UK Home Office, extensively tested in UK and USA and approved by CPNI (Centre for Protection of National Infrastructure) in UK and Dept of State in USA. It is the only CPNI approved geotextile barrier available and has been specified on many past, current and future security projects.

The increase in the threat from Vehicle Borne Improvised Explosive Devices (VBIED) and Hostile Vehicles has led to a need for effective protection systems to maintain maximum stand-off distance as well as blast mitigation in the event of an attack. DefenCell has been extensively and successfully tested against both VBIED and HVM and the cellular design dissipates energy along the length of the barrier very effectively.

DefenCell Profile is designed to provide perimeter security, from enhancing existing security systems and fences, to providing structural integrity to long perimeter barriers. DefenCell can be built to virtually any height and profiled to provide protection against specific threats. The Profile system has been successfully tested to UK PAS 68 Hostile Vehicle Protection standards and two standard versions are available to suit different threat levels. The ability of Profile to retain the suspect vehicle within the structure blocks a secondary attack.

DefenCell - MAC - welded mesh gabions (Ballistic, Blast, HVM and Flood Protection)

DefenCell MAC® is our range of protective welded mesh metal gabions lined with geotextile and supplied in several standard sizes and known in the US as the Expeditionary Barrier System (EBS). The EBS is available under long term contracts with US DOD and NATO procurement agencies and have been supplied to many other military forces, security services and NGO’s.

DefenCell MAC® gabions are filled with earth, sand or other locally available fill materials and provide ballistic protection, blast mitigation and HVM vehicle barriers. MAC can also be used for environmental applications and is ideal for flood protection.

DefenCell MAC® is constructed using the highest quality materials to established and tested standards by Maccaferri, the world's leading manufacturer of gabion structures, using heavily galvanised welded mesh panels combined with a heavy duty geotextile lining material created from UV resistant polymer fibre using the same advanced technology as the proven DefenCell fabrics.

DefenCell - Shooting Ranges - Government approved

Recent projects in USA, UK, France, Africa and South America for Ranges using DefenCell, emphasise the excellent value and versatility of the products.

The Africa and South America ranges were both designed by Government authorities  specifying DefenCell products. DefenCell has been approved by, and appears in the range design handbooks of, the National Rifle Associations in UK and USA.

DefenCell - UXO (Unexploded Ordnance)

Tested and certified for explosive containment, DefenCell has been approved by the prestigious US Dept of Defense Explosives Safety Board (DDESB). The requirements in the US for unexploded ordnance disposal are well documented as traditional ranges and training areas in US, Hawaii and other overseas locations are opened to public access and need to be cleared of old ordnance.  This is usually done by certified civilian contractors. 

Ongoing engagement by DefenCell experts with DDESB in USA and the NATO EOD Centre of Excellence in Slovak Republic maintain our solutions in the forefront.

DefenCell - NGO’s and Civil contractors - bunkers, observation posts, compartmentalisation and fuel & ammunition storage

DefenCell Barriers have been widely deployed by the various NGO in Somalia, S Sudan, Chad, Mali and DRC as well as several other global locations. The light weight and portability of the Barriers lends itself to remote and austere locations while the MAC is used consistently to build perimeter security as well as bunkers, observation posts, compartmentalisation and fuel & ammunition storage protection.

Flood

DefenCell T2 Barrier and DefenCell MAC FE 3 (Flood & Emergency)  have both been successfully tested by ERDC and offer a lightweight and proven solutions to flood, coastal erosion and critical infrastructure protection.

Civil Protection

Physical protection of critical infrastructure.  The DefenCell Profile product range is ideal for both overt and discreet requirements.  The products have been extensively trialled and tested to protect against specified threats including Vehicles, IED’s, and holds Internationally recognised certification.  (PAS68 etc).

Proven Customers include Power Stations, Fuel farms, Airports, Border and Immigration posts, Police Stations as well as oil and gas installations.

DefenCell - Testing - Blast Mitigation, Speeding Vehicles, UXO and Flood Barriers

DefenCell products have been extensively and successfully tested during development against Ballistic Threats (Small arms to Rockets), Blast Mitigation, Speeding Vehicles, UXO (unexploded ordnance) and as Flood Barriers (both operationally and in laboratory conditions). An ongoing programme of further testing is part of the continued development of DefenCell products.

Support

Technical & Sales Support is provided by experienced Engineers with design and on-site installation advice supported by practical training and concise construction manuals and videos.

Was founded in 1946 and has over 60 years experience in the manufacture and supply of a wide range of Defence and Security Equipment for Governments, Defence Forces, Security Forces, NGOs and commercial customers all over the world. Franklin manufactures shelter tents for accommodation, command posts and field hospitals; CBRN tent liners; webbing and PLCE; camp beds and mosquito nets; camouflage nets and clothing and equipment for emergency relief and humanitarian aid.

The company has expanded but J & S Franklin remains a compact family-run business which guarantees reliability, continuity and confidentiality.

J & S Franklin has a reputation for delivering high quality products to our many customers and has successfully sought to understand and satisfy their precise requirements.

Experienced executives provide professional advice and frequent in-country visits with the support of highly trained and skilled staff and consultants.

J & S Franklin is a major Contractor to the UK Ministry of Defence as well the preferred supplier to many overseas Governments, Police Forces, International Agencies and the United Nations. It operates a quality management system assessed to the quality system standard BS EN ISO 9001:2008

J & S Franklin Manufacture a Wide Range of Equipment:

Military Tents and Shelters

Standard shelters and specialised units tailored for specific requirements

The GP shelter family are the mainstay of the UK MoD Improved Tented Camp (ITC) system and are extensively deployed in Iraq and Afghanistan. They have a lightweight tubular frame providing high strength and stability. Being of modular design, they can be extended and joined for field hospitals or shelter complex.

Franklin also makes the shelters for the Operational Field Catering System (OFCS) and more than 1400 have now been supplied to the UK MoD. The OFCS Shelter is based on the standard 12’ x 12’ shelter tent, modified with heat-resistant fabrics and cut-outs in the roof for the OFCS cooker chimneys.

CBRN Equipment for collective and personal protection - CBRN protective liners are made of CBRN-resistant materials and Franklin manufactures a range of liners that can be designed to interface with various vehicles and containers.

Camp Equipment - Camp Cots, Cot mounted and free standing Mosquito Nets and folding chairs have all been supplied to MoD.

Camouflage Nets and Systems - Individual, IRR, Thermal

Webbing and Personal Equipment - Rucksacks and Travel Bags are currently being made as well as the shelter sheet in both woodland and desert camouflage patterns.

J & S Franklin is often the chosen partner to give a complete turnkey service, using its extensive facilities to deliver a Single Source Supply; combining rapid response, experience and confidentiality to provide economical, secure and effective solutions, on a global basis. We are experts in the provision of specialised turnkey operations, drawing together the many components needed to satisfy our customers requirements; the latest and most suitable equipment, experienced support personnel, full training packages, secure packaging and delivery services and, when necessary, finance, counter-trade and insurance.

DefenCell™

In association with Terram J & S Franklin can also offer DefenCell™ which is an expeditionary earth filled barrier system to allow structures to be constructed from locally available compactable materials to allow the quick assembly of defensive and protective structures.

Franklin is also supplying the MoD with a range of full-size inflatable decoy targets for training. The inflatables offer realistic visual, radar and thermal image signatures and are rapidly deployed in less than 15 minutes and include Scud missile and launcher, T72 tanks and SA15/19 vehicles.