At Mobile Mark, we understand that military requirements are different, that the antennas will be used in difficult environments and need to be ready for squad deployments, pop-up stations, or communications intelligence-gathering (COMINT).  That’s why our antennas are rugged, durable and reliable.

Mobile Mark  - Military Antennas

We handle the usual and the unusual, from standard products to specialty products. Think if it as “COTS with flexibility”. We offer all the convenience and cost savings of off-the-shelf products but with the ability to tweak the design to better meet your in-the-field requirements.

We have antennas for many commercially available wireless networks as well as antennas for dedicated military frequencies, such as 1350 MHz or 4.4 GHz. Our antennas are designed and manufactured in the United States.

Our in-house Engineering Design Team has years of experience in antenna design.  We can supplement your own engineering efforts and be a valued RF sounding board.  We can help you envision all sorts of ways the antennas can be used, including break-apart omnis and embedded, body-worn patches.

Mobile Mark military antennas comply with Mil specs such as MIL-810G. Our antennas are designed and tested in our in-house facilities located in the US, just outside Chicago.

Mobile Mark offers more than just a wide range of antenna designs, we offer the company behind the antennas: knowledgeable, easy to work with, and ready to be your antenna partner.

visit www.mobilemark.com for our full product line.

Network Antennas (OD-BA, PS18-4900-45, SCR-2400/5500)

Mobile Mark offers omni-directional site antennas in military appropriate colors such as olive drab and desert sand.  Specialized antennas to speed network deployment include the 12 dBi Break-Apart Antenna that can collapse down into two easy-to-carry pieces.  We also offer low profile, compact directional antennas for dependable point-to-point connections.

Embedded Antennas (EM, CVL, PM-1350)

For specialized applications where it is important to track the individual soldier, embedding the antenna directly in the troop’s equipment or clothing has many advantages… and tradeoffs.  We can help you understand what you gain and what you lose with different antenna styles.  Our expertise includes board-only styles as well as slim profile over-molded styles.

Asset Tracking Antennas
(HD7-915, RM w/ Groundplane Rods, SM-U15)

Reliable asset management requires making use of multiple systems: RFID tag readers, Wi-Fi based Bar Code scanning, GPS location systems as well as Cellular M2M (machine-to-machine) transmissions.  Mobile Mark can help you put together the right mix of antennas from site to mobile to covert.

Vehicle Antennas (LTM501, SMW-305, SMD-W)

Mobile antenna selection becomes complicated as new wireless protocols, such as LTE and 802.11ac, are added to the network.  Mobile Mark is the industry leader in multiband antennas; we can combine multiple antenna solutions in a single compact, durable package.  Our mobile antennas meet Military specs for Shock, Vibration, Temperature and Water Ingress.

Specialized Frequencies (ECO9-4700, PSTN2-2200, RMM-1400)

Sometimes a COTS antenna just needs to be tweaked to cover a different frequency or to provide a different radiation pattern.  And, sometimes, the need is so unique that nothing but a customer design will do the job.  Mobile Mark’s team of design engineers can handle it all, whether the design requirement is electrical or mechanical.

Honeywell Safety Products has become the world’s largest personal protective equipment (PPE) provider, with annual revenues of more than $2 billion. We are backed by the powerful global resources of Honeywell International and its $1.5 billion corporate R&D budget. Honeywell Safety Products draws on the corporation’s exceptional technology and innovation capabilities to develop new materials, electronics, sensors, and communication systems.

QUIETPRO®
Intelligent Hearing Protection and Communication Systems

QUIETPRO® QP400 is an intelligent digital communication headset and high-level hearing protector for military use. QUIETPRO® significantly improves communications and situational awareness in noisy surroundings while protecting the users’ hearing. It adds no weight to the head and is fully compatible with all military ground, vehicle and ballistic helmets and CBRN protection gear.

This unique combination of features is targeted to enhancing the capability of the soldier performing his duty in harsh and dangerous environments, and to allow for the use of one system only for all combat scenarios.

QUIETPRO® QP400 from Honeywell Safety Products is an advanced Intelligent Hearing System that provides high-levels of ‘verifiable’ hearing protection. Hearing protection that adapts to the noise environment to permit the user to hear sounds around them – when safe to do so.

Mission Safety Critical - Two-way Military Communications

QP400 ensures mission (safety) critical two-way communications are received clearly and accurately, first time in all noise scenarios.

QP400 connects to multiple two-way radio, platform intercom, soldier navigation solutions, sniper or gunshot detection systems, smart cell phones or personal music devices. With automatic configuration of the interface to the device connected, the correct equalization (matching) of the interface is assured without any user intervention.

QP400 is designed using the core processing architecture and algorithms developed for the successful QUIETPRO and QUIETPRO+ systems. More than 63,500 of these original QUIETPRO systems have entered service with a variety of Government user groups in 15 countries worldwide.

QP400 allows the user to enhance their natural hearing so that they can hear sounds that cannot be heard with their ears alone. It also enables the user hear sounds around them ensuring that retain their localized situational awareness. Vital for their personal safety and security.

QP400 continuously adapts to the noise environment, always providing the correct level of protection, but never over protecting. The QUIETPRO® is developed to only attenuate what is absolutely necessary and only for as long as the protection is needed. When the dangerous noise is no longer present, QUIETPRO® immediately restores full hearing capability.

QUIETPRO® is designed to allow for intelligible communication in high noise environments up to 110-115dB. QUIETPRO® attenuation > 40 dB for Impulsive noise protection. Overall passive attenuation of the foam tips - SNR 34dB (EN352-2).

QP400 incorporates digital Active Noise Reduction (ANR) that provides further attenuation for low frequency noises in additional to that provided by the foam ear tips. This highly stable digital ANR system automatically activates (only when required) and cancels out the rumbling of the low frequency noise from sources such as armoured vehicles (tracked and wheeled), large engines, boats, fixed wing aircraft and helicopters.

QUIETPRO® has undergone many extensive and rigorous evaluation and assessment programs by independent test and validation organizations in Europe, Australia and the United States. With the exception of impulse noise testing above 160dB (explosions), testing has been conducted on human beings to assure accurate and realistically reliably results.

Soldier Hearing Protection

QP400 automatically performs a FIT TEST of the in-ear headset to ensure that a good level of hearing protection and clear two-way communications are obtained. This feature provides the user with confidence that a high level of protection is being achieved.

QP400 can be configured to connect multiple radio and communication systems. Up to 4 separate communication channels.

QP400 can connect a variety of headset types, including; the QUIETPRO in-ear high noise headset, circumaural ‘muff’ headset, on-ear / single sided headset and less overt headsets. The user is able to choose the headset and adapt the QP400 to meet their requirements or personal preference.

QP400 provides the user with an intuitive MENU function with voice feedback provided through the headset. This enables the user to control the modes and operation of the QUIETPRO system to meet their requirements and preferences. This voice feedback can be provided in different languages.

The QP400 has been designed to facilitate rapid mount-dismount transitions with mobility platforms, while maintaining continuous connectivity to the communications network.

QUIETPRO In-ear Military Headset

The new QUIETPRO in-ear headset is now available with a custom moulded ear tip or the comfort improved ear tip PROTIP. The PROTIP provides a very high level of attenuation of noise (independently tested), with a significant improvement in user comfort. Consequentially, the headset can be worn continuously for extended periods of time.

The QP400 has been designed with the capacity to introduce new features and capability enhancements through software modifications only.

Overview of the QP400

The QP400 retains the core processing architecture and mathematical algorithms of the battle proven QUIETPRO® and QUIETPRO+ products. In excess of 63,500 of these original products have been delivered to customers worldwide.

The feedback and experience gained from this extensive base of installed products has driven the fundament redesign of the product to achieve the QP400.

• Redesigned the Control (processing) Unit. More tactile and simplified user controls.
• Intuitive Menu system to control functions and modes of the system. Spoken voice feedback is provided to user through the headset – greatly reduces the time required to train on the operation of the system.
• Comfort improved ear tips.
• Placement of all cables and connectors on one side of the Control Unit to allow greater mounting options on the vest or load carriage system to suit the user.
• Interchangeable headsets – user selectable depending upon mission or personal preference.
• Compatibility with legacy in-service headsets using QP400 adapter cables.
• User configurable Control Unit mounting options.
• Increased number of communication channels from 2 to 4 (independent channels)
• Automatic Configuration of system to communication device(s) connected.
• Dedicated tactical radio and platform / mobility connection points, with high reliability, rapid disconnect connectors.
• Reduced weight
• Quick release connectors for easy connection/disconnect
• Replaceable mounting brackets to provide full flexibility of mounting options

QUIETPRO System Components

• Headset with two lightweight in-ear earpieces.
• Control Unit with 3 PTT buttons (primary controls) and menu, confirm and volume buttons (secondary controls)
• Interface cables for other audio devices such as vehicle intercoms and alternative tactical radios.
• Optional wireless ‘dual’ PTT.
• Optional wired one button chest PTT or one button finger PTT
• Optional headset adapter cable to connect end customer legacy headsets to the QP400.
• Y splitter cable to enable two separate radios to be connected to the radio communication connector

Truck-Lite Europe Ltd is a global leader in the design and manufacturing of vision systems; servicing the Commercial Vehicle, Military and Defence Vehicle, Off-Highway and Automotive sectors of the industry. Alongside our sister companies in the USA and Asia, we have been supplying some of the largest OEM’s worldwide with components for fifty years; from the likes of Daimler, Volvo and Scania to some of the largest military organisations in the world; including the US military.

Military Vehicle LED Lighting Technology

A LEADER IN THE DESIGN OF VISION SYSTEMS

Working with such giants of the industry enables us to understand the demanding requirements, our lighting and mirror products have to meet.

Under the brand names of Truck-Lite, Rubbolite, FER and Signal-Stat we have become a fore runner in lighting technology and mirror manufacturing. We have a strong emphasis in the design and innovation of LED technology – a phrase which is now synonymous with Truck-Lite and displaying our ability to adapt to an ever-changing and evolving marketplace.

SPANNING ACROSS THE GLOBE

With a strong heritage and 11 manufacturing locations spread over nearly 100,000m² worldwide, we are able to support our customers regardless of their location. Owned by Penske, the largest logistics company in the USA, our plants span the globe: from New York, and Pennsylvania as well as Mexico in North America, to China in Asia, and Germany, Poland and Belarus in Europe. Our UK bases are in Harlow, Essex and Birmingham.

Military LED Vehicle Lights

MILITARY LIGHTING: FROM THE FRONT, DOWN THE SIDE, TO THE BACK

Truck-Lite Europe Ltd has developed its products in accordance with the ever growing demands of both the customers we serve and the technologies we have helped develop. We are evolving the way in which ‘Vision Systems’ are being viewed, and working with our OEM customers.

We manufacture lighting from the front to the back of the vehicle: headlamps, auxiliary lamps, floodlights, side markers and rear lamps, which are able to be mounted on various applications – from tanks and armoured vehicles, to recovery vehicles, four-wheeled drives and SUVs.

SUPPORTING OUR CUSTOMER WITH OUR TEAM

Truck-Lite globally provides vision solutions to various military organisations within the UN, involved in ISAF engagement. Military lighting systems are mounted to vehicles in both conflict and post-conflict arenas.

We take a 360° approach to our customer relations, keeping the company structure flat; removing the red tape, improving communication and bringing decision makers close to the ground. Our Managing Director Aaron Ryalnce insists on this. He said: “It’s vital to maintain a steady and transparent information flow - from those at the root of our company, right up through to the president. Our employees deal with customers and operations every day and we need to stay connected and remain nimble to meet the demands of those customers.” Truck-Lite’s global reach is part of our foundation, “…we don’t silo ourselves in terms of region,” Aaron continued, “We don’t have those barriers”.

QUALITY AS STANDARD

Our portfolio of off-road customers has led to products being developed to perform in some of the harshest conditions without dropping performance. Each of our products is put through one of the highest testing-specs in the industry, with up to 15 gruelling examinations: measuring everything from water-resistance and flammability, to dust and particle resistance; as well as being the only unit in the UK equipped to measure photometrics up to 30 metres, with our lab’s state-of-the-art optics and reflex bench. Each test ensures the security of our end-users and maintains the reputation of our customer base. 

E-Reg Coatings Ltd is based in Burnley, East Lancashire, and has over 30 years experience in the finishing industry. Providing a complete service including the application of Military, Defence and Specialist paint finishes, as well as industrial powder coatings, we are committed to offering complete customer care and satisfaction. Specialising in Chemical Agent Resistant Coatings (CARC) for over ten years.

Having earned full ISO 9001-2008 accreditation since September 2004, E-Reg Coatings Ltd has a policy of continuous improvement ensuring the best solutions and quality are given to all our clients, whether its large capacity production runs or small on off projects.

All work is processed to the exact specifications and tolerances detailed by our customers and we have a dedicated team to care for every aspect of our services, from initial enquiry and order processing to Inspection and quality assurance. We work closely on all projects with our clients who are based throughout the UK and overseas, ensuring that quality is to the highest standard and that delivery schedules are always met.

Committed to meeting customer needs and expectations, an environment has been established which encourages all employees to focus on, and pursue, continuous improvement in reliability, performance and the quality of products and services.

Examples of Specifications we currently work to:

Chemical Agent Resistant Coatings (CARC)

These finishes are used extensively on military vehicles, communications systems, weaponry and all ancillary equipment. The coating produces a non-porous surface that impedes chemical, radioactive and biological contaminants from penetrating the paint and base materials. CARC resists chemical attack from the aggressive cleaning detergents used for decontamination of the equipment. Coatings offered can include IRR Properties and come in various colours and gloss levels.

US CARC Paint Systems

MIL-DTL-64159B Type II

Two component waterbourne polyurethane Infared Reflective and Chemical Agent Resistant Coating for Military equipment.

MIL-DTL-53039 Type II

Single component moisture cure aliphatic polyurethane which is a camouflage chemical agent resistant coating for military vehicles and equipment.
These coatings are available in the following FED-STD 595 colours:

• Green 383, 34094
• Black 37030
• Brown 383, 30051
• Tan 686A, 33446
• Aircraft Green 34031
• Aircraft Grey 36300

UK MOD CARC Paint Systems Include:

DEF-STAN 80-153 Defence Coating

A single pack, air drying finish with IRR properties used for service vehicles and ancillary equipment

• Colour - Light Stone

DEF-STAN 80-166 Defence Coating

A two pack IRR paint system used for defence equipment which complies with DEF-STAN 00-23 and STANAG 2338

• Colour - NATO Green and Black

We welcome enquiries for other paint systems and will strive to source materials wherever possible. Examples of some other paint systems we regularly use are:

DEF-STAN 208/209

Two pack polyurethane HS low VOC matt / gloss coatings for ground equipment and ancillary items. Satisfies requirements for IRR Camouflage and hydraulic fluid resistance.

MIL-PRF-22750G

This high solids epoxy topcoat is intended for use on the interior of military ground equipment.

• Colours include: Flat Grey, Gloss white and Sea foam green.

DEF-STAN 80-122

Polyester high durability, IRR Powder coating in NATO Green and Tan.

Most paint systems are available upon request.

Quality Control

E-Reg Coatings Ltd holds full  ISO 9001:2008 accreditation and uses fully documented quality procedures. These procedures are adhered to at every stage to ensure all components are pre-treated, coated, inspected and packed in accordance with the customer’s specifications. Sample panels are processed to full spec, alongside components, which are then tested for paint thickness and adhesion, using fully calibrated equipment.

Staff

One of our most valuable assets is our highly skilled and experienced staff. Using their knowledge and expertise they apply a proactive approach to problem solving on the job. Some of our members of staff have over fifteen years experience working with military contracts and specialist specifications.

Investment

By using the most suitable plant, and using first rate materials, we are able to guarantee consistency and quality. We believe that by investing in our equipment, and our work force, we can provide a superior finished product which, in turn, results in satisfied customers and repeat business. Over the years we have heavily invested in plant and equipment to provide in-house facilities to cover all aspects of pre-treatment and processing required for the Military, Defence, Specialist and Industrial sectors.

Capacity and Plant

We currently deal with contracts ranging from one off jobs through to regular, large quantities of small components i.e. over 15,000 components per month.

Our plant consists of:

• 3m x 3m Clean air room with water wash spray booth
• 4m water wash spray booth
• 3m water wash spray booth
• 3 cubic meter Electric Oven
• 5m x 3m x3m Gas fired oven
• 5m double pass gas oven with online conveyor track
• Alocrom pre-treatment plant 900mm x 900mm x 600mm
• 2m x 1.2m Vapour De-greasing plant
• Specialist Masking / De-masking facilities
• 2 x Pad Print Machines
• 2 ton Counter Balance Fork lift truck
• Flat bed transport Collection / delivery facilities
• Sister Company to E-Reg Sheetmetal Fabricators LTD www.eregsheetmetal.co.uk

The Industry Standard in Mobile Forensics

Cellebrite is the market leader in mobile forensics and known for its technological breakthroughs in the industry. Its Universal Forensic Extraction Device (UFED) is used internationally by law enforcement, military, intelligence, corporate security, special forces, financial services and eDiscovery agencies in more than 60 countries, to obtain data from more than 10,000 device profiles.

Cellebrite’s range of mobile forensic products, UFED Series, enables the extraction, decoding and analysis of actionable data, whether intact or deleted, from a wide range of mobile devices including: feature phones, smartphones, portable GPS devices, tablets and phones manufactured with Chinese chipsets.

With offices in North America, APAC, Europe and the Middle East, Cellebrite provides technical assistance and support advice 24/7.

Obtaining Evidential Data From Mobile Devices

The data stored in mobile phones reflects virtually every activity in which users engage every day; who they have spoken to, where they were last, who they were texting, what apps were downloaded and who their most popular contacts are. In situations where a mobile device has been seized for evidential value, investigators require forensic tools that can extract as much data as possible in a forensically sound manner.

UFED Touch is a stand-alone, portable, easy-to-use touch screen device which enables the forensically sound extraction of data from more than 10,000 device profiles. These include the world’s most popular platforms –BlackBerry, iOS, Android, Nokia and more.

Supported data types include applications, passwords, chats, images, multimedia messages, SMS, email, instant messaging, locations, calendar entries, contact details and more.

UFED Touch is available with either an 'Ultimate' or 'Logical' license. The Ultimate license provides users with the most advanced capabilities to perform physical, logical and file system extractions of intact, deleted and hidden data, and passwords.

The Logical license is a solution for first responders and triage purposes, allowing users to perform fast and simplified logical extraction, and analysis of intact data.

The First Responders Kit for Mobile Forensic Triage

When time is of the essence, first responders require simple tools to quickly and accurately acquire important data from mobile devices. The UFED Touch Logical is easy-to use, suitable for non-technical investigators and comes fully equipped with everything a first responder needs anytime, anyplace; a suite of software applications for simple analysis and reporting, and a set of hardware tools including device connector tips and cables, for fast and secure data extraction.

UFED Applications - Analysis and Decoding of Mobile Data

The “golden hour” of an investigation – when evidence is freshest – is the ideal time to develop critical investigative leads.
UFED Series enables users to exploit this opportunity to the fullest.

UFED Physical Analyzer is the most advanced analysis, decoding and reporting application in the mobile forensic industry.
Features include malware detection, project analytics, timeline graph, and much more.

With Cellebrite’s UFED Link Analysis, users can immediately identify and visualize the connections and communication methods used between multiple mobile devices, based on data extraction reports.

UFED Reader enables users to share analysis reports with other authorized personnel including colleagues, other investigators, lawyers etc.

UFED Phone Detective is available with all UFED versions. It helps investigators quickly identify a mobile phone by its physical attributes, eliminating the need to open up the phone and risk phone lock.

The Forensic Industry Votes for UFED

Cellebrite's UFED Touch has been awarded for the following:

• 'Best Phone Forensic Hardware' – Forensic 4cast Awards 2009, 2010, 2011, 2012
• Industry Innovator – SC Magazine 2012
• 5 Stars Recommended Product – SC Magazine 2013

Everything You Need for Successful Investigations

UFED Touch comes with either a standard or ruggedized kit. The kit contains a full range of peripherals and accessories for thorough mobile device investigations; purpose-designed lightweight data cables - the phone connector tips, SIM and Micro SIM ID cloning cards, Micro SIM adapter, UFED forensic memory card reader, integrated long-life battery, external hard drive and more.

Purpose-designed for Mobile Forensics

• Physical extraction of data and passwords from leading smartphone platforms – BlackBerry®, iOS and Android
• Exclusive bit-for-bit decryption and decoding from BlackBerry devices running OS 4, 5, 6 and 7
• Physical extraction while bypassing any type of lock from more than 200+ Android devices – Exclusive support for Motorola, Samsung and HTC devices
• Logical and file system extraction enabled from any iOS devices
• Physical extraction can be performed on locked iOS devices with a simple or complex password
• Physical extraction from locked and unlocked Nokia BB5 devices – Decoding of call logs and SMS's is supported for selected devices
• Exclusive TomTom trip-log decryption and decoding
• Physical extraction of data and passwords from phones with Chinese chipsets – MTK and Spreadtrum
• Forensically sound extraction with proprietary boot loaders
• Unrivaled device support – More than 10,000 device profiles

HEADQUARTERS
Cellebrite Ltd.
94 Em Hamoshavot St
Petah Tikva 49130
Israel
Tel: +972 3 926 0900
Fax: +972 3 924 7104USA
Cellebrite USA Inc.
266 Harristown Rd., Suite 105
Glen Rock, NJ 07452
USA
Tel: +1 201 848 8552
Fax: +1 201 848 9982GERMANY
Cellebrite GmbH
90Am Hoppenhof 32a
33104 Paderborn
Germany
Tel. +49 52 51 54 64 90
Fax. +49 52 51 54 64 9 49APAC
Cellebrite APAC PTE Ltd
#11-05 San Centre
171 Chin Swee Rd.
Singapore 169877
Tel: +65 6438 6240
Fax: +65 6438 6280

Web and email: www.ufedseries.com      sales@cellebrite.com

Bugeye Technologies is an ISO 9001 Certified manufacturer and a supplier of flight simulation equipment supporting both large and small simulation companies in the US and worldwide.

Simulation Components for Tactical and Mission Specific Training

Bugeye Technologies specializes in producing realistic, serviceable and affordable replicated products for the flight simulation industry.  Each product is designed as an accurate replication of the real hardware providing the proper functionality at the lowest total cost of ownership for your simulation program.

Our standard products include a complete line of high-quality replicated flight grips, targeting controllers, control sticks, cyclic collective and throttle mechanisms, avionics and light-panels for many popular fixed wing and rotor craft.

Correct Fidelity Controls for Your Specific Application:

Bugeye will always modify our standard products to meet the specific requirements of your program.  This makes it possible to get the correct level of fidelity in a fully serviceable package at the best price.  We call these Simulation Grade components.

Training device fidelity Requirements can vary based on many factors.  These factors are often driven by the “Mission” of the training device and the available budget.  In some cases the training does not require full fidelity and perhaps the budget just won’t allow it.

Bugeye Technologies has responded to these requirements with 3-levels of fidelity available for our FC series of flight control simulation products.  The FC0500 is a low-cost control product that is “gamer” like but considerably more rugged than typical game controls.  The FC1000 series controls are representative of the design basis aircraft with precision movements in a compact versatile package for desktop or cockpit applications.  The FC2000 series product replicates the aircraft movements, is ergonomically and dimensionally correct.  Providing this choice between the FC0500, FC1000 or the FC2000 series products from Bugeye Technologies insures alignment of value and training needs that cannot be easily acquired elsewhere.

Bugeye Technologies is an ISO 9001 Certified manufacturer and a supplier of flight simulation equipment both large and small companies in the US and worldwide.

Multipurpose Reconfigurable Cockpits (MRC)

Bugeye Technologies manufactures a low-cost multipurpose cockpit that is compatible with all of Bugeye’s FC1000 series Flight Control products.  The cockpit is designed for rapid reconfiguration by changing out flight controls to support multiple aircraft types.

The low overall height facilitates ingress and egress.  The side consoles are available in multiple lengths and equipped with full length DZUS rails at standard aircraft spacing to accept our FC1000 controls and other standard aircraft panels.

A low-cost Simulated Ejection Seat (SES1013) is available for this cockpit.  The seat fits perfectly in the MRC and comes complete with dual density seat pad, optional Ox rings and electrically adjustable height adjustment with 6 inches of travel (3 inches up and down from the neutral position).  The seat is rated for loads up to 600 lbs.

An optional 30-inch high-quality touch screen beneath the standard glare shield provides a large working area to present the most complex aircraft instrument panels. The rugged and reliable touch screen utilizes surface acoustic wave technology suitable for use with gloved hands with minimal parallax.

The MRC represents a great value in a mid-fidelity Simulation Grade cockpit

This universal product ships with castors and leveling adjustments accessible from the top.  It can be rolled into existing dome environments or coupled with existing visual display systems.  The cockpit is also designed to work with Bugeye’s OTW1000-3W Out-The-Window visual display stand.  This unique stand will hold 3- commercial flat panel displays up to 55-inches in the correct orientation for use with the MRC.

Custom Light Panels and Cockpit Furnishings

Bugeye Technologies designs and manufactures a complete line of Simulation Grade light-panels designed to support our customer’s requirements for high-fidelity fixed wing and rotor craft cockpit products.  Since all of our products are “in-house” we can support requirements from the simplest to the very complex; in large quantities or one-off designs that replicate the form, fit and function required in today’s simulation environment.

Bondline is a leading supplier in Static Control Products.
We have been supplying the electronics industry for over 30 years.
During this period we have developed, as a company, in both size and expertise, in order to meet the ever increasing and complex needs of our customers.
We offer our customers a one stop shop for all their static control needs, from a simple ESD wrist band to specialist test meters.
We can also offer in- house training and ESD surveys for companies who need some expert advice with in their static safe areas.
Bondline has a work force which is dedicated to achieving the highest of standards, many of whom  have worked in the industry and Bondline specifically for many years. The loyalty of our staff leads to a wealth of knowledge which we are happy to pass on to our customers .

As previously touched on, we are able to supply many products, most of which, can be shipped next day from our well stocked warehouse.

Military Bespoke Packaging

Our forte as a company is that we are able to provide a specialist and individual service for bespoke packaging, from vacuum forming to packing boxes made of conductive fibreboard or coated cardboard with foam inserts etc.

This type of packaging is widely used in all industries from Aerospace, Medical. MOD and Electronics.

We also offer an extensive range of black conductive plastic boxes for packaging of electronic components etc.
As part of our packaging range, we offer all types of ESD bags, with a wide variety of sizes.

Bondline Surface Resistivity Test Instruments for the Military

Bondline have developed several new products over the last few years, two of which are the Floor Test Kit and the Solder Iron Test Instrument.

The first being a kit which specifically tests ESD floors. It can test that the floor is static safe also that the floor is actually grounding the operator. The kit is portable and very easy to use.

The second, an ESD soldering iron test instrument, is a simple but effective piece of equipment which ensures that whilst an operator is cleaning their solder iron tip the meter will also check the solder iron is grounded.

Bondline have their own brand of Surface Resistance Meters and Wrist Strap Testers which offer a simple but effective way of testing that surfaces e.g.mats and bench tops are static safe, and also that wrist straps and heel straps are working correctly.

We have many instruments and test kits which enable companies to test their Static Safe abilities.

Bondline ESD Garments and Gloves for the Military

Our ESD Garments are exclusive to Bondline. These lab coats are available in Blue or White and come in sizes from small to XXX large.
They are made from a poly cotton material which has a conductive fibre woven into the material giving them their ESD properties.
Bondline can offer a next day service on all sizes for all quantities; whether you are looking for just a few lab coats for a small test house, or a complete factory.

We also have a wide range of ESD gloves and overshoes which are suitable for all types of environments.

Bondline Anti- Static Spray for Military use

For all Static Control areas it is essential that handling and storage of static sensitive parts is taken seriously . Bearing  this is mind Bondline offer an extensive range of conductive polypropylene, storage, handling and picking boxes.

There is also a special frame system which when integrated with the boxes can offer an excellent card system which has been found to be ideal in all sectors of industry from  electro/mechanical , electronics to mines as well as in the manfacture of explosives.

Bondline Killstat Products

We offer a range of Killstat sprays and cleaners for use within an EPA.

These are an inexpensive and effective solution for long term static control.
The spays are water based and after drying they leave an ultra-thin static-dissipative layer which prevents the build-up of any static charges.
To complement this range we also provide a non-greasy ESD hand lotion.

Military Personnel Grounding and Field Service

An essential part of any EPA is to make sure all personnel are grounded, usually using a combination of wrist straps and heel straps.
Bondline can offer a wide variety of grounding straps, from clean room compatible to a basic disposable type, ideal for visitors and one time use applications.
If you have field service engineers, our portable static control workstation is ideal, it contains everything you need to ground an engineer in the field and comes in a handy carry wallet.

Military Ionizers

Bondline can offer a series of High Frequency Ionizers. These Ionizers offer a quick and efficient way to eliminate static.
You can find the complete range in our Bondline catalogue and on our the web site.

The Complete Package

As part of a One Stop Shop, Bondline can supply not only consumables but also Static Control Flooring, Benches, Chairs and many other products.

Our aim at Bondline  is to provide products of the highest standard, all our products comply with the requirements of BS EN 61340-5. Where applicable items are CE approved.

We are always developing new and innovative products to enhance the Bondline range, to keep up to date with us
Please check on our web site or follow us on twitter.

As a manufacturer of decontamination equipment, OWR has been setting the standards for CBRN defence and civil protection for more than 50 years. Using modern techniques and user-friendly application systems, OWR develops and builds efficient mobile decontamination solutions for its customers, offering them a complete service from product development to training and after sales service. With a full range of products ranging from small hand-held spray applicators such as the Cobra, to the containerised multi purpose decontamination systems such as the MPD 100i, OWR can offer a solution to fit the needs of the customer, and with a design team constantly developing new and innovative products, OWR is setting the standards for the future of decontamination and helping to provide a safer and more certain future for the world.

Compact Decontamination Equipment
COBRA Decontamination Spray Unit

The COBRA is a 0.4 ltrs decontamination spray unit used for emergency decontamination or disinfection. Giving a spray area of approximately 11m², the COBRA can be filled with any liquid decontamination or disinfection solution and has been developed in close cooperation with both military and civil customers as part of their personal protective equipment for CBRN operations. The hand held unit contains a patented pressure pump system with which the operator can quickly creates a pressure to allow the liquid to be sprayed. The COBRA has a metal stainless steel body and chemical resistant seals and requires no special preparation before use.

The COBRA comes either as a stand alone unit supplied with a carrying bag which clips to a belt, or can be incorporated into kit supplied in a robust plastic carry case.

Light, Transportable Thermal Fogging System - DECOFOG

The Decofog is a light, transportable thermal fogging system designed to apply decontamination solutions as a fog. It is simple to use, has no mechanical parts and can be set up for use in seconds. Based on “jet-engine technology” it uses hot air to vaporise a solution and turn it into a fog with particles of 1 to 4 microns. The Decofog is robust and been designed to be operator friendly with large grip handles. It is supplied standard with an operators harness and metal travel case. Using chemically resistant parts it is suitable for use with aggressive chemicals and needs little maintenance. The Decofog is used by multiple NATO countries and has the NATO Stock Number NSN 4230-01-499-5612.

Decontamination and Disinfection Fogging Device - FOGBOOSTER

The FOGBOOSTER is the new generation of decontamination and disinfection fogging devices. By using compressed air combined with an especially designed nozzle, decontamination or disinfection fluid is microscopically atomized to form particles on a micro-scale basis to produce a highly effective dry mist or fog. The FOGBOOSTER produces a micro-film mist which covers all surfaces and gets into all gaps and joints, detoxifying or decontaminating all surfaces. The Fogbooster is lightweight (approx 6 kg) quiet and highly mobile and can either use standard compressed air bottles or a compressor to run.

Fast Response Mobile Decontamination System - SMGD RACCOON

The SMGD has been designed as a fast response mobile decontamination system. Completely self contained with its own generator, diesel and decontamination solution tanks, it is a compact decontamination unit for the application of water-free decontaminants when decontaminating vehicles, large equipment, infrastructure, roads and high-value equipment. The system is based on a low pressure spraying system and comes complete with decon spray lances and an independent high pressure cleaning unit for pre-cleaning.

The generator of the SMGD creates enough power to run the decontamination system and provide external power for the independent sprayer and lights. Designed to be transported to the decontamination site on a pick-up, once un-loaded it can be easily moved easily by one person whilst still running. The unit is ready to use within 1 minute and needs only to be switched on.

Multi Purpose Decontamination System - DEDAS

The DEDAS is a universal mixing unit which can be programmed to mix all commercially known decontamination solutions. The patented low-pressure system allows the mixing of emulsions, foam and diluted solutions for decontamination purposes, in either small or large quantities. It has a capacity of up to 200l/min and can even be used with seawater. The DEDAS can be used as a stand-alone unit but is used as the heart of the OWR MPD 100 multi purpose decontamination system.

SURF-EX Decontamination Unit

The SURF-Ex is a decontamination unit which uses industrial vacuuming technology combined with a spray-extraction system to clean and decontaminate surfaces of CBRN, HazMat and explosive material. The SURF-Ex can be used to vacuum all types of dry hazardous dust without danger to the operator due to its comprehensive filtering and dust collection system. Its can also be used to clear up liquids and uses a spray-extraction system to decontaminate and clean surfaces of hazardous and dangerous chemicals. By using GD-6 with the spray extraction system, the surfaces of sensitive equipment can be decontaminated without risk. Using comprehensive selection of inter-changeable vacuuming and spray heads ensures that the SURF-EX can be used to tackle multiple decontamination tasks.

The SURF-EX was successfully demonstrated in Fukushima, Japan and was successfully used to clean vehicles, equipment and external surfaces of radiation.

Multi Purpose Decontamination Units - MPD

The Multi Purpose Decontamination Unit or MPD is a complete decontamination system Contained in a 20ft ISO container a standard unit can decontaminate 120 persons per hour, 20 light vehicles per hour, or 6000m² of terrain decontamination. Despite its large capacity, the MPD100 is a highly mobile unit containing 3000 ltrs of water and can be operated using 4 personnel.

The MPD 100 has recently been upgraded to include the UAM (Universal Application Module). The MPD 100i can apply ready mixed decontamination solution using low pressure technology and offers an enhanced decontamination capacity.

GD-6
The decontamination solution GD-6 is a ready to use patented decontamination solution which is used to decontaminate chemical warfare agents. It is especially effective when used with OWR low pressure application technology, but can be used with any spray unit and fogging units.

SPINNER is the leading European manufacturer of Rotary Joints for transmission of high-frequency, Data, optical signals and fluid media and has more than 40 years of experience in the industry.

The SPINNER group has production facilities in Germany, Hungary and China with over 1,100 employees worldwide. Our subsidiaries and representatives are present in over 40 countries and provide our customers with an international network of support. Quality, flexibility and service have made the group internationally successful.

SPINNER High-Frequency Rotary Joints

Single and Multi-Channel RF Rotary Joints and Hybrid Solutions

High-quality SPINNER hybrid rotary joints are mainly used in military radar systems, fire control systems, rotating vehicle-mounted camera systems and in mobile battlefield communication systems.
In areas such as ATC (Air Traffic Control) and commercial SatCom, for airborne, naval and ground based solutions SPINNER’s rotary joints are widely used as well.

The following main components are designed and manufactured by SPINNER at our production facility in Westerham, Germany, and we are able to supply:

• Single or multi-channel coaxial rotary joints
• Waveguide single or multichannel rotary joints
• Fiber optical single or multichannel rotary joints
• Contactless Fast Ethernet and Gigabit Ethernet
• Media joints for fluids and air
• Contactless power transmission

The combination of the above mentioned groups of transmission technologies and encoders are so called hybrid rotary joints, combined with slip rings.

This enables SPINNER to offer complete system solutions from a single source. These solutions are achieved by the utilization of a highly motivated team of research and development engineers, equipped with state-of-the-art design and simulation tools.

CNC Turning and Milling Centres

SPINNER in-house manufacturing capabilities include:

• CNC controlled turning and milling centers
• Electroplating for all common surfaces
• Mechanical test equipment (covering sub-micron range to ensure outstanding quality)
• Climate and salt spray chambers for environmental tests
• Shock and vibration tests, as well as testings in co-operation with external institutes

This high quality standard guarantees a frictionless operation in extreme situations.

FORJ (Fiber Optical Rotary Joint) and Gigabit Ethernet Transmission

These are the most commonly used combinations for next generation high performance radar and data transmitting systems. Normally, one or two high-power channels (coax/waveguide) are combined with several low-power channels. Slip ring modules for power supply and data transmission are additionally integrated. Due to constantly increasing data rates, optical rotary joints and contactless Gigabit Ethernet transmission are becoming more important.

SPINNER solutions are widely spread from the standard 21 channel FORJ to smallest available 6 channel FORJ on the market, down to a single channel FORJ that can be integrated into the inner conductor of a coax channel with an outer diameter of only 3mm.

Customized Solutions including Media Joints

SPINNER delivers a large variety of rotary joint combinations according to customer specifications in all varieties, frequency bands and sizes.
The integration of media joints and contactless Gigabit Ethernet ensure that SPINNER solutions are able to provide all requirements of any radar system.   

SPINNER offers as well connectors, special phase adjustable cable assemblies for phased array systems, power combiners for radar transmitters and many others.

The quality assurance (QA) system at SPINNER has been certified according to DIN EN ISO 9001. The results of our endeavors are documented in our DIN EN ISO 14001 certified environmental management system.

Rotary Joints Maintenance and Repair

For rotary joints and slip rings the SPINNER technicians offer their wealth of experience for repairing and maintaining these components and systems – regardless of whether they are SPINNER or third party products.

SPINNER offers as well connectors, special phase adjustable cable assemblies for phased array systems, power combiners for radar transmitters and many others.

The quality assurance (QA) system at SPINNER has been certified according to DIN EN ISO 9001. The results of our endeavors are documented in our DIN EN ISO 14001 certified environmental management system.