Will-Burt Germany provides high-quality mobile mast systems and trailer solutions for military and security / rescue forces. They are used around the world: the armed forces of Germany, its NATO allies and other likeminded nations. Will-Burt Germany has progressively turned into a global player with subsidiaries and partners on every continent.

The object of Will-Burt Germany is the development, project planning, construction and system integration of our customized trailer systems. We carry out and follow your plan from A to Z. Special trailers for special tasks are our specialty. Many of our trailers are manufactured in small series. They are used by the German Army and other international forces. Our trailer systems are especially designed for missions involving extraordinary burdens in extreme and arduous terrain. High payloads in combination with low basic weights, maximum cross-country mobility, long life expectancy and low maintenance requirements are the characteristics of all Will-Burt Germany tactical trailers.

Our mast systems are used by international forces around the globe, including the German Army, to provide communications, surveillance, reconnaissance support etc. throughout the battlefield.

The Expedition series (Ranger mast) is the lightest, most durable, rapid deploying, single man-portable field masts in the world. This system is equipped with lightweight payloads and can be deployed quickly by extending 1.2m sections to heights from 2.5m to a maximum of 18.3m. It’s our system for the ‘last mile’.

The AntennaMast AM2 model is a portable, lightweight, rugged, aluminum tripod mast designed for rapid payload deployment. The AM2 can raise multiple devices on an individual mast and is highly flexible and reliable. Users can lift and lower larger payloads in a secure way without disassembling the mast system by using the EZ Raze™ system and its safety brake and cable winching device. The mast tube lift winch supplies mechanical assistance for mast tube lifting for heavier payloads, and the mast tubes and payload can also be elevated by breach loading the tubes through the tripod center collar.

Telescopic crank masts KVL and KVR (also called cable pulls) are for payloads up to 70kg and heights up to 20m. They are suited for heavy communication systems, monitoring solutions, direction finder, target detection systems, etc. and used by the market leaders. These masts uphold their reputation through their robustness and simple operation. The extension and retraction of this mast type is realized through a retractable rope and a separate return rope. This guarantees a reliable operation independent of the weather conditions.

The Spindle mast SPM is currently the best available mast system on the market. Grown against the hardest requirements, the SPM is specifically designed for use with large payloads and very high demands of accuracy. The retracting and extension occur through special spindle systems. A special honing procedure of the aluminum tubes and the use of high-precision spindles enables the manufacturing of nearly backlash-free telescopic spindle masts for heights up to 18m and payloads up to 600kg!

The spectrum of lattice towers starts with the ITS Towers. ITS offers an innovative line of commercial-off-the-shelf (COTS) tower solutions from 11.5m to 32m. Will-Burt Germany lattice towers are customized solutions, mounted on trucks or trailers, for heights up to 45m and payloads up to 1000kg. Our giants!

The Will-Burt Company is pleased to introduce the One Company initiative, a program designed to ensure that we operate as One Team, guided by One Vision, representing One Brand – Will-Burt. This initiative formalizes our way of thinking and our passion to serve our customers. It was created to make it easier for our clients to engage with Will-Burt, no matter where they are or whomever they communicate with in our global organization. All locations have been renamed Will-Burt followed by their geographic location. For instance, GEROH, located in Germany, has been renamed Will-Burt Germany Gmbh & Co. KG. Company web sites will be consolidated under www.willburt.com and the GEROH social media platforms will be renamed Will-Burt Germany.

At Mobile Mark, we understand that military requirements are different, that the antennas will be used in difficult environments and need to be ready for squad deployments, pop-up stations, or communications intelligence-gathering (COMINT).  That’s why our antennas are rugged, durable and reliable.

Mobile Mark  - Military Antennas

We handle the usual and the unusual, from standard products to specialty products. Think if it as “COTS with flexibility”. We offer all the convenience and cost savings of off-the-shelf products but with the ability to tweak the design to better meet your in-the-field requirements.

We have antennas for many commercially available wireless networks as well as antennas for dedicated military frequencies, such as 1350 MHz or 4.4 GHz. Our antennas are designed and manufactured in the United States.

Our in-house Engineering Design Team has years of experience in antenna design.  We can supplement your own engineering efforts and be a valued RF sounding board.  We can help you envision all sorts of ways the antennas can be used, including break-apart omnis and embedded, body-worn patches.

Mobile Mark military antennas comply with Mil specs such as MIL-810G. Our antennas are designed and tested in our in-house facilities located in the US, just outside Chicago.

Mobile Mark offers more than just a wide range of antenna designs, we offer the company behind the antennas: knowledgeable, easy to work with, and ready to be your antenna partner.

visit www.mobilemark.com for our full product line.

Network Antennas (OD-BA, PS18-4900-45, SCR-2400/5500)

Mobile Mark offers omni-directional site antennas in military appropriate colors such as olive drab and desert sand.  Specialized antennas to speed network deployment include the 12 dBi Break-Apart Antenna that can collapse down into two easy-to-carry pieces.  We also offer low profile, compact directional antennas for dependable point-to-point connections.

Embedded Antennas (EM, CVL, PM-1350)

For specialized applications where it is important to track the individual soldier, embedding the antenna directly in the troop’s equipment or clothing has many advantages… and tradeoffs.  We can help you understand what you gain and what you lose with different antenna styles.  Our expertise includes board-only styles as well as slim profile over-molded styles.

Asset Tracking Antennas
(HD7-915, RM w/ Groundplane Rods, SM-U15)

Reliable asset management requires making use of multiple systems: RFID tag readers, Wi-Fi based Bar Code scanning, GPS location systems as well as Cellular M2M (machine-to-machine) transmissions.  Mobile Mark can help you put together the right mix of antennas from site to mobile to covert.

Vehicle Antennas (LTM501, SMW-305, SMD-W)

Mobile antenna selection becomes complicated as new wireless protocols, such as LTE and 802.11ac, are added to the network.  Mobile Mark is the industry leader in multiband antennas; we can combine multiple antenna solutions in a single compact, durable package.  Our mobile antennas meet Military specs for Shock, Vibration, Temperature and Water Ingress.

Specialized Frequencies (ECO9-4700, PSTN2-2200, RMM-1400)

Sometimes a COTS antenna just needs to be tweaked to cover a different frequency or to provide a different radiation pattern.  And, sometimes, the need is so unique that nothing but a customer design will do the job.  Mobile Mark’s team of design engineers can handle it all, whether the design requirement is electrical or mechanical.