Profile
News
Videos
Contact

TSS International

Thanks to almost 40 years of experience, TSS International specialises in Armour Mobility: keeping special (armoured) vehicles moving and enabling them to get to safety in the hardest of circumstances. Whether you need runflat systems, heavy duty alloy wheels, protected fuel tanks, heavy-vehicle brake systems or vehicle intercoms, TSS aims to provide you with the best products and highest service to meet your mobility requirements.

Mobility is a vehicle’s most important asset, TSS International makes sure your vehicle gets to use that asset as long as possible.

TSS International: Armour Mobility

Rodgard Runflat Systems

A vehicle’s traction and control is greatly determined by its tyres. Normally, when a tyre is punctured, traction and control are rapidly reduced, because the tyre is no longer held in place and will eventually remove itself from the wheel. Rodgard Runflat Systems make sure the tyre remains in place and keeps contact between the vehicle and the road, providing full control over the vehicle, even with more than one flat tyre.

Rodgard Runflat Systems are available in different configurations, with flat tyre mobility ranging from 15 to 80 km at speeds suitable to get to a safe location.

Rodgard Runflat systems are available for standard 1-piece rims ranging in size from 13 to 22.5 inch in diameter.

Rodgard Runflat Systems comply to Finabel Standards.

TSS Heavy Duty Wheels

TSS has developed wheels especially for luxury armoured vehicles. These 1-piece alloy wheels have a TuV certified pay-load of 1800 kgs per wheel and are especially designed to give optimum performance with Rodgard APX Runflat Systems and MOV'IT Security™ Brake Systems. Ballistic testing has shown these wheels do not crack when shot at, making them very suitable for the hardest circumstances. Vehicles served by these wheels are among others: Toyota Landcruiser 200 V8, Mercedes-Benz G-class, Mitsubishi Pajero, Nissan Patrol, Range Rover, Land Rover Defender, GMC Suburban, VW Touareg, Mercedes-Benz S-class, Hyundai Equus and Lexus LS and LX.

Special development: Rodgard APX Runflat Systems. Designed to get the most mobility out of your TSS Heavy Duty Wheels.

MOV’IT Security
Heavy Duty Brakes for
Armoured Vehicles

The added weight of an armoured vehicle’s protection has its effects on the original brakes. To make sure your vehicle can safely stop, more than once, heavy duty brake upgrades are required.
 
MOV’IT Heavy Duty Security Brakes deliver the most consistent and best performance with:

  • High grade steel calipers
  • Larger and thicker rotors and brake pads for more friction surface and heat dissipation
  • Braided, stainless steel brake lines
  • Better balance for the added weight and higher centre of gravity

MOV’IT Security heavy duty brake systems for armoured vehicles are now exclusively available at TSS International.

TSS ProtecTank - Fuel System Protection

By converting your standard fuel tank into a TSS ProtecTank, you protect yourself and your passengers against leakage, explosion and fire which can be caused by your fuel tank being shot at. A fuel tank being shot at is at its most dangerous when it is half empty, due to the high flammability of the fumes. TSS ProtecTank technology minimises explosions, self-seals ruptures and limits the effect of any external fire.

And last but not least: TSS ProtecTank makes sure your vehicle gets to use its main energy source as long as possible: its fuel.

TSS ProtecTank makes use of the OEM fuel tank, and is tailor made to fit your vehicle.

B&G Vehicle Intercoms

Sometimes opening the window or door of your armoured vehicle is simply not an option, due to the surroundings not being safe enough. So, when approaching a roadblock or checkpoint, how do you communicate with the people on the outside of your vehicle? B&G Vehicle Intercoms allow you to have a two-way conversation with someone on the outside of your vehicle, without having to compromise the safety of your armour. The system is discretely fitted, easy to use, equipped with three standard siren tones, and can be expanded by an optional hand-held microphone. All intercoms as well as Red-Blue emergency lights and and yellow-white auxiliary lights are available through B&G’s European Distributor TSS International BV.

A short summary of the possibilities, in addition to the above mentioned options:

  • The PW Series, a vehicle intercom for inside-outside communication, is available in 50, 100 and 200 watts.
  • The PW Series is standard-equipped with integrated sirens that have multiple tone options.
  • The PW Series also has an optional, practical hand-held microphone with easy control of all functions.
  • The VC Series, for internal communication in vehicles with two or more compartments, for example limousines or prisoner transport vehicles.
  • The BM, a monitor that provides insight into the voltage level/status of the two batteries in a vehicle equipped with many electronics.

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

TSS International
Zuideinde 30
2991 LK Barendrecht
Netherlands

+31 180 618 922
+31 180 611 326

sales@tssh.com

www.tssh.com

Profile
Contact

Iveco Defence Vehicles

Iveco Defence Vehicles is a brand of CNH Industrial N.V., a World leader in Capital Goods listed on the New York Stock Exchange (NYSE: CNHI) and on the Mercato Telematico Azionario of the Borsa Italiana (MI: CNHI). Iveco Defence Vehicles is dedicated to delivering innovative automotive and protection solutions to meet the needs of military customers worldwide.

The company manufactures specialist logistic, protected and armoured vehicles in its facility in Bolzano in Northern Italy, as well as marketing Iveco's full commercial range, adapted as necessary to meet the demands of the military user. In consequence, Iveco Defence Vehicles has a full range of vehicles to meet a broad spectrum of defence applications.

Iveco Defence Vehicles has a full range of vehicles to meet a broad spectrum of defence applications.

Modular Designs Provide Outstanding Mobility,
Protection and Payload

Iveco DV’s range of Multirole Vehicles, Tactical and Logistic Trucks, and Armoured Fighting Vehicles covers the full spectrum of on- and off-road military requirements and represents a well thought through, comprehensive and effective response to the needs of the military customer.

Iveco DV’s engineers have exploited the modular approach adopted in our commercial range to provide direct benefits to the military user.  This philosophy allows the solution to be tuned as closely as possible to the identified needs of the user without time-consuming re-engineering.

The whole product range is subjected to a continuous development process under which evolving needs are fed back to our engineers, who, in turn, develop a steady stream of enhancements in terms of payload, mobility and protection.

SUPERAV – A New Generation of Amphibious Armoured Vehicles

 

Iveco has developed the 25-tonnes SUPERAV 8x8 Medium Armoured Vehicles family specifically to undertake amphibious operations.  All variants share the same innovative multi-layered hull design.  This approach combines advanced materials with leading edge technologies, and provides exceptional levels of vehicle and crew survivability without compromising amphibious performance. Thanks to its modularity and the ease with which it can be reconfigured, the SUPERAV 8x8 can be air-transportable, is capable of maritime operation beyond Sea State 3, and can mount weapons up to 30mm calibre.

The Centauro 8x8 Armoured Vehicle Family

The 26 - 30 tonnes combat proven Centauro family of wheeled 8x8 armoured vehicles is designed for land operation and can be adapted to meet a wide variety of roles.  Many variants are already available, and, of these, the Centauro 120mm MGS ‘tank-on-wheels’ is today’s fastest and lightest vehicle equipped with a 120mm gun – and the only wheeled one existing.  This vehicle is also available mounting a 105mm gun.

The Centauro VBM Armoured Personnel Carrier (APC) and Armoured Infantry Fighting Vehicle (AIFV) feature a hull specifically designed to maximise crew survivability. With an inner volume of about 11m3, the AIFV is equipped with a 25/30mm two-man turret and can accommodate a driver and 8 fully equipped dismounts, while the APC offers 14 m3 and can carry up to 12 dismounts.

The Centauro family is offered through CIO Iveco – Oto Melara, a joint venture with Oto Melara of Italy who are responsible for providing the turret systems.

Multirole and Mission-Adaptable Vehicles

Iveco has focused on the development of multirole platforms which are capable of fulfilling a range of applications.  Characterised by their exceptional mobility, agility and terrain accessibility, and their high levels of protection against both ballistic and mine attack, this range of vehicles is based on two platforms – the Light Mulitrole Vehicle (LMV) and the Medium Protected Vehicle (MPV).  With a wide variety of configurations already developed, they are equally effective on peacekeeping, counter insurgency and war fighting missions.

Light Multirole Military Vehicle

 

The LMV is a purpose built military vehicle which nonetheless benefits from the use of many commercial components.  Rugged and highly mobile, it is based on a modular design which enables the development of a wide range of variants with differing wheelbases, roofs, crew cell configurations and protection levels.  This modularity accommodates many configurations, most recently, a special forces variant.  The LMV is rapidly becoming the light protected vehicle of choice in Europe, with sales to nine armies to date.

Medium Protected Vehicle (MPV)

The multirole approach is also seen in the MPV which Iveco has developed in partnership with KMW.  To meet the demand for heavily protected utility and multipurpose vehicles able to provide high levels of ballistic, mine and IED protection, the new 4 x 4 MPV family occupies the mission space between the LMV and the Centauro 8 × 8 AFV family.

In order to produce a reliable, rugged, well protected vehicle with a class leading payload, Iveco took the decision to exploit its highly successful Trakker chassis.  Innovative well informed engineering coupled with a class leading commercial chassis has delivered a well protected, adaptable vehicle with high mobility at a cost far below that of bespoke military vehicles.

A Logistic Capability for both Protected
and Unprotected Applications

One of the characteristics of current operations is that there is no front line.  In recognition of this, Iveco Defence Vehicles has developed a class leading protected cab which can be fitted to Iveco’s heavy duty 6×6 and 8×8 Trakker chassis.  The result is a robust, highly mobile but cost effective logistic vehicle which can operate even in high threat areas.

 

The modular design of the Trakker range provides a choice of a wide range of wheelbases and drive trains, all of which are supportable through the Iveco dealer network.  This enables Iveco to provide a highly versatile, exceptionally well protected logistic fleet to meet a wide range of demanding roles.

Purpose Designed Military Trucks
for Specific Operational Requirements

IVECO Defence Vehicles also offers a full range of battle proven, powerful and capable 4×4, 6×6 and 8×8 purpose designed military logistic vehicles to provide tactical support to any military operation in the most hostile environmental conditions.  The vehicles can be fitted with a cab which allows them to be airportable in a C130.

The whole range can be equipped with a new generation of add on armour kit, achieving a unique combination of performance, payload and protection to support any military operation in the most hostile environmental conditions.

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

Iveco Ltd
Iveco House
Station Road
Watford
Herts
United Kingdom

+44 (0)1923 259728

andrew.bucknall@iveco.com

www.iveco.com

Profile
Videos
Contact

The O’Gara Group - Sensor Systems Division

The Sensor Systems Division of The O'Gara Group designs and manufactures enhanced technology products that provide Special Operations, Homeland Security, Law Enforcement and other specialized users with improved situational awareness in both night and day operations.

  • Intensified Night Vision Systems
  • Sensor Fusion Systems
  • Heads Up Display (HUD) and Helmet Mounted Display (HMD) Systems
  • A full range of Head / Helmet Mounting Accessories
  • Combat ID Systems
  • Tagging, Tracking, and Locating (TTL) Beacons
  • Digital and Fused Night Vision Devices for ISR (Intelligence, Surveillance & Reconnaissance)
  • Laser Illuminators and Pointers

Low Profile Night Vision Goggle - AN/PVS-21

 

Low profile design with a total depth of just over 3 inches, unequaled for aggressive night operations, such as, rapid terrain traversal, weapons employment, parachuting, close-quarter battle, and vehicle operations. See-through optics design eliminates tunnel vision and enables smooth, natural transition from dark to light, defeats blinding glare and improves operations during ambient light surges. Cup-less eyepieces enhance situational awareness with improved peripheral vision, the low profile also results in a larger field of regard.

  • Low Profile design enables aggressive night mobility
  • Unique "see-through" beamcombiner system capitalises on both intensified and normal (unintensified) vision
  • See-through capability permits seamless ops when encountering bright light conditions
  • 40° FOV Dual Tube System
  • Sensor Fusion capability with integrated Heads Up Display
  • Rugged design features water proof construction up to 10m
  • IR-LEDs enable zero ambient light operations
  • Use of conventional batteries (Single AA battery - 1.5V Alkaline - 3.6V Lithium)
  • Less than 8 cm deep
  • Low movement arm compared to conventional NV equipment
  • Profile and improved centre of gravity enhance capabilities in confined spaces and permits aggressive use in rough terrain
  • Compatibility with existing head straps and helmet mounting systems (NATO standard)
  • Significantly enhances ease of use with weapons

Low Profile Night Vision Monocular

 The Model 2740 Low Profile Night Vision Monocular is the monocular version of the AN/PVS-21 Low Profile Night Vision Goggle and maintains all the same powerful features, including Sensor Fusion capability. Left and right versions available.

 

  • Low profile design significantly enhances night mobility
  • See-through optics instantly transition to bright light
  • Enhanced situational awareness with sensor integration
  • Battle proven. The most rugged system available
  • Large un-intensified field of view
  • Improved depth perception and close-in field of regard
  • Eliminates vertigo and tunnel vision of conventional systems
  • Reduced centre of gravity for comfortable, extended wear

Accessories including Helmet Mounting options and Head Harness

 The Head Harness is a proven design for helmet-less Night Vision and Day Viewer applications, provides for full equipment security and operator comfort. The STS (Sensor Technology Systems) Stowage Mount is specifically designed for use with the LPNVG (AN/PVS-21), LPNVM(Monocular), or Day-viewer and integrates into the standard NATO helmet mount.

 

The mount has adjustment mechanisms which easily permit up/down and fore/aft positioning of the attached device.  In addition, the fixed mount provides a course tilt adjustment to center the attached device for proper eye alignment.  Finite tilt adjustments are made using the tilt mechanism found on the Low Profile Night Vision Goggle, Low Profile Night Vision Monocular, or Day-viewer. The viewing device can be quickly removed from the Fixed Mount and the mount is also easily dismounted from the helmet receiver. Stowing of the goggle or monocular is simply achieved by rotating the PVS-21 upward out of the line of sight.

Conformal Enhanced Heads Up Display – Sensor Fusion

Every AN/PVS-21 is CEHUD capable, (as shown above) providing operators with the only night vision goggle available today with integrated sensor fusion for night and day operations. Displays input from virtually any composite video or analog SVGA source in hi-res color or black and white, including real time downlinks, FLIR, wearable PC, thermal imaging, weapon sites, and vehicle systems.

 

This enables seamless information overlay, providing operators real time and heads up command of their surroundings and tasks at hand. Capable of wireless reception of detached or distant information sources with optional transmitter/receiver systems. Display module adds only 30gms of weight to the goggle; personnel retain excellent maneuverability even during the most rigorous situations. Battery pack designed to fit protection vests or and comfortably worn on user.

NOVA - Multi-Spectral Combat ID Beacon

The Nova is a multi-spectral combat ID beacon for covertly marking blue force personnel and vehicles. It includes broadband thermal, NIR and white LED emitters. When operated in thermal mode, it emits no visible signature and is undetectable by conventional night vision equipment.

 

The Nova has an optical output of approximately 480 mW in the mid-wave IR band (3 to 5 micron), 104 mW in the long-wave IR band (8 to 12 micron), 450 mW in the NIR band (850 nm), and 80 lumens in the visible spectrum. The beacon's wide divergence and high power ensures high visibility to air or ground mounted thermal imaging systems and night vision devices. The self-contained unit can be easily configured for use on a helmet, MOLLE vest, pack, or vehicle.

  • Positive ID of blue force personnel and vehicles from ground based and airborne thermal imagers, targeting systems, and NVGs
  • Covert - When operated in thermal mode the Nova is undetectable by all visible and NIR cameras and image intensified night vision devices
  • Six emitter locations can be populated with any combination of emitters
  • Multiple Nova beacons can be synchronized to flash in unison

Star Thermal IFF Beacon

The Star Beacon is a thermal combat ID beacon for covertly marking blue force personnel and vehicles. It emits no visible signature and is undetectable by conventional night vision equipment. The Star Beacon has an output of approximately 2300 mW in the mid-wave IR band (3 to 5 micron) and/or 400 mW in the long-wave IR band (8 to 12 microns).

 

The beacon emits in a full hemispherical pattern for high visibility to air or ground mounted thermal imaging systems. The emitter head, battery pack, and mount system can be easily configured for use on a helmet, vehicle, MOLLE vest, or pack.

  • Positive ID of blue force assets from both ground and airborne thermal imaging systems
  • 1 km visibility to cooled LWIR imagers - 10 km visibility in MWIR with common imagers
  • Invisible to Gen III image intensifiers
  • Small and low profile - available with mounts for helmets, MOLLE vests, and vehicles
  • Multiple star beacons can be synchronized to flash in unison
  • Full hemispherical divergence from the horizon to zenith

Military Laser Illuminator and Pointer - Cyclops III

The Cyclops III is a compact handheld laser pointer and illuminator. With over 1 watt of optical power in the 852 nm version, it is the most powerful handheld NIR laser pointer on the market. The beam is adjustable from a collimated spot to a 4.5 degree flood. It is available in several wavelengths including 852, 1064, and 1550 nm. Weapon mount versions of the Cyclops III are also available.

 

  • Point out targets day and night at ranges over 5 km. Laser beam is visible for over 35 km
  • Compact design easily fits in the palm of your hand, ammo pouch, or vest pocket
  • CW and pulse modes - small spot size, divergence < 0.5 mrad
  • Also functions as a long range IR illuminator with a high power and uniform illumination beam - greatly extends the effective range of night vision devices

About The O’Gara Group - Other Divisions
The O’Gara Training & Services Division provides comprehensive anti-terrorism, force protection, and tactical training for the military, as well as federal, state and local law enforcement agencies. O’Gara delivers world class training at any client’s location and currently operates cutting edge tactical training facilities in Montross VA, Alton VA, and Barksdale TX. Each facility features unique terrain, capabilities, and amenities. World-class instructors provide advanced driver’s training, force protection, convoy operations, close quarters battle, marksmanship and advanced sniper training for both short and long range weapons. Each facility provides comprehensive security training which exceeds most requirements for military and security training.

The O’Gara’s Mobile Systems Division is a global provider of discretely armored civilian vehicles. We possess the capability to design and integrate armor solutions into commercially available vehicles. Additionally O’Gara retains the competency to integrate suspension, electrical, trim modifications and through life support in order to deliver an all inclusive vehicle solution. The O’Gara Group’s recent addition of Protection Devices Inc. (PDI) to their Mobile Security Division complements their existing product portfolio. The heritage business in San Antonio, Texas currently manufactures Department of State specified vehicles consisting of the Chevrolet Suburban, Chevrolet Express Van and the Toyota Land Cruiser 76-Series.

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

The O’Gara Group
Sensor Systems Division
2794 Indian Ripple Road
Beavercreek
Ohio 45440
United States

+1 937 490 2509
+1 937 426 4820

stan.babb@ogaragroup.com

www.ogaragroup.com

Profile
Contact

Sensitron Semiconductor

Sensitron, established in 1969, is a leading manufacturer of high reliability power electronic solutions including motor controllers, smart power management and conversion, space diodes, voltage protection components and embedded boards. Sensitron, with a significant heritage in space power and space control systems, is positioned as a world leader in the advanced technology industry. Our products are designed, manufactured, tested, and qualified for applications where size, weight, and reliability are critical to mission success.
Sensitron has over 40 years heritage of serving the complete spectrum of reliability markets including space, aerospace, medical and defense. Sensitron is AS9100 Registered and ISO9001:2000 Registered

JAN QPL and Equivalent Diodes

Sensitron offers JAN, JANTX, JANTXV, and JANS QPL certified diodes and space equivalent diodes to meet your diode requirements. Sensitron has a wide portfolio of Power Rectifiers, Schottky Diodes, Small Signal Switching Diodes, Vf Controlled Diodes, Zener and TVS Diodes that are QPL or equivalent to the QPL Slash sheets.

Additionally we supply QPL extension products which support specification requirements beyond the QPL products available today and products to customer SCD’s. Sensitron’s diodes are available in axial and MELF packaging.

 

Die Products: Rectifier, TVS, Zener, Schottky and Small Signal/Switching

Sensitron’s Die Products are designed, manufactured, tested, and qualified for applications where size, weight, and reliability are critical to mission success. Sensitron can perform Lot Acceptance Testing to the process flow following MIL-PRF-38534, Class H and Class K, and MIL-PRF-19500, Class H and Class K. 

Sensitron’s die products include general purpose, fast, & ultrafast rectifier die, TVS die, zener die, schottky die, and small signal switching die.

Motor Controllers and Drivers

Sensitron’s offers a wide portfolio of COTS fully integrated motor controllers, modules, and assembles.  Our fully integrated three phase motor controllers include speed/velocity controllers, torque, sensorless, and sinusoidal motor controllers.

Sensitron also offers evaluation boards for quick system evaluation, easily used through a GUI interface. Sensitron’s IGBT and MOSFET bridges, field oriented controller, high power motor drive assemblies, and 3-Phase BLDC with EMI Filter are among the COTS Motor Controllers products readily available.

Solid State Power Controllers and Boards

Sensitron offers among the widest COTS portfolio of
SSPCs (Solid State Power Controllers),
combining functionalities of electro-mechanical breaks, solid state relays, and system monitors.

Sensitron’s portfolio includes Multi channel boards, single channel modules, relays/contactors, and MIL-STD-1275 Transzorb.

 

 

High Reliability Discretes

Sensitron’s high reliability hermetic discretes have been a part of Sensitron’s standard product line for over 40 years.

Available in various voltage and current ranges, Sensitron offers Schottky Recitifiers, Silicon Carbide Rectifiers and Bridges, MOSFET & IGBTs, Voltage Regulators, Zeners, and Power Packs.

 

 

Transient Voltage Suppressors

Sensitron’s Transient Voltage Suppressors meet and exceed high quality standards including, MIL-STD-1275, MIL-STD-1399, MIL-STD-2036 and MIL-STD-704.

Our products include MIL-STD-1275 Tranzorbs, TVS Arrays, TVS Modules, Lightning Strike Protection arrays, and die & diodes.

 

 

Custom Hybrids

Sensitron is positioned as a world leader in the advanced technology industry, with products that are designed, manufactured, tested, and qualified for applications where size, weight, and reliability are critical to mission success. Sensitron's custom hybrids offer:

  • Superior thermal performance and high power density
  • Flexible design configurations and various power device options
  • Best performance/space ratio over competing technologies
  • Sophisticated advanced simulation and modeling tools with an R&D team

 

 

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

RSM Sensitron Semiconductor
221 West Industry Ct.
Deer Park
New York
United States

sales@sensitron.com

List Your Company Design Agency